JETEQS K450 Ultra High-Pressure Jetting System
Maximum Power for Extreme Industrial Cleaning, Hydrodemolition & Offshore Applications
Engineered for continuous industrial water jetting operations in high ambient environments. Meets demanding safety specifications, international quality benchmarks, and factory verified pressure tolerances.
Engineering Overview
The JETEQS K450 Ultra High-Pressure Jetting System delivers high operational reliability for demanding surface preparation, hydrodemolition, industrial tube cleaning, and tank refurbishment tasks. Built with precision components to withstand high continuous duty cycles.
Key System Features
- Massive 450 kW continuous power delivered inside a 20ft sound-insulated ISO container footprint
- Dual operational modes: Automatic Pressure Control Mode and Manual Speed Setting Mode
- Automated multi-consumer pressure compensation keeping engine at optimal efficiency
- Diamond-ground ceramic valves and fluid end instrumentation
- Electrically and thermostatically controlled weather protection air louvers
- 10-hour full-load fuel tank with 2,600 L stainless steel feed water tank
Modular System Configurations
The JETEQS K450 Ultra High-Pressure Jetting System is engineered around a flexible modular chassis architecture, allowing rapid customization from road-legal mobile trailers to heavy offshore containerized installations.
Heavy Container Solution
Standard 20ft sound-attenuated ISO container with CSC certification, internal maintenance walk-around, electrical ventilation louvers, and 2,600 L stainless header tank.
- 20ft sound-insulated ISO container with CSC certification for maritime freight
- Electrically operated weather louvers providing storm protection and acoustic damping
- Massive 2,600 L stainless steel feed water tank with automatic level management
- Internal operator workshop with tools, spare parts racking, and telemetry station
Mobile Trailer Version
Extreme-duty multi-axle chassis with aerodynamic acoustic enclosure for mobile contract hydrodemolition and turnaround services.
- Heavy triple-axle chassis engineered for rough jobsite transfer
- Comprehensive soundproofing hood keeping operational noise strictly controlled
- 50 m cable reel remote controller with dual emergency stop circuits
- High-capacity fuel tank providing up to 10 hours continuous full-load operation
Rigid Baseframe Unit
Heavy industrial structural steel baseframe optimized for stationary oil & gas processing skids, refineries, and high-pressure test bays.
- High-capacity reinforced I-beam structural steel baseframe
- Certified heavy crane rigging pad eyes for offshore platform crane lifts
- Integrated booster pump skid and multi-stage stainless steel filtration
- Vibration-damped engine and K45000 pump subframe isolation
Noise-Reduced Baseframe
Heavy skid with tuned acoustic baffling and vibration isolation mounts for quiet industrial operation in residential or congested plant areas.
- Sound attenuation panels engineered for low frequency engine drone mitigation
- Tuned acoustic inlet and exhaust silencers with certified spark arrestors
- Quick-release panels for full mechanical access during maintenance turns
- Complete fluid containment drip tray with environmental drain valves
Industrial Applications
The JETEQS K450 Ultra High-Pressure Jetting System delivers verified hydraulic power across critical industrial sectors requiring continuous duty and stringent safety benchmarks.
Oil & Gas Industry
Heat exchanger cleaning, vessel and tank cleaning, drilling rig maintenance, offshore pipeline cleaning and descaling.
Industrial Testing
Hydrostatic pressure testing, pipeline stress testing, and pressure vessel integrity certification up to 3,500 bar.
Steel & Metallurgy
High-pressure descaling of hot rolled products, mill stand cleaning, and continuous casting plant washing.
Shipbuilding & Marine
Hull paint stripping, marine biofouling removal, and surface preparation before recoating in commercial dry docks.
Construction & Infrastructure
Concrete hydro-demolition, bridge and tunnel surface refurbishment, deep well regeneration, and hydro-scarification.
Chemical & Petrochemical
Deposit and polymer residue removal from reactors, heat exchangers, reboilers, and distillation columns.
JETEQS K450 Ultra High-Pressure Jetting System Technical Specifications
Verified Engineering Data| Specification / Parameter | Engineered Rating / Value |
|---|---|
| Operating Pressure | 3,500 bar (50,763 psi) |
| Minimum Pressure | 180 bar (2,610 psi) |
| Maximum Flow Rate | 1,310 L/min (346 GPM) |
| High-Pressure Pump | KAMAT K45000-3G Plunger Pump |
| Drive Power | 450 kW (612 HP / 603 PS) |
| Engine Output | Up to 478 kW (650 HP) Stage V |
| Engine Model | Volvo TAD 1385 VE (405 kW) / Scania DC16 314A (478 kW) |
| Bare Pump Weight | 1,360 kg |
| Container Unit Weight | 11,500 kg |
| Dimensions (L x W x H) | 6,058 x 2,438 x 2,591 mm (20ft ISO Container) |
| Feed Water Reservoir | Integrated 2,600 L Stainless Steel Tank |
| HP Connection | Dual-gun High-Pressure Distribution Block |
Equipment Scope & Options
Standard Factory Scope
- • Soundproof 20ft ISO container with CSC safety approval and corner castings
- • 2,600 L stainless steel buffer feed tank with booster pump
- • Chalwyn emergency engine intake air shutdown flap and spark arrestor
- • 50 m heavy-duty cable reel with handheld controller flask
- • Dual-operator high-pressure connection manifold block
Available Accessories & Conversion Kits
- • Multi-consumer manifold distribution block for up to 4 simultaneous operators
- • Explosion-proof offshore instrumentation package
- • Wireless digital industrial remote control
Technical Datasheet & Specifications
Inspect the official KAMAT Diesel Units technical specification document directly in the interactive viewer below.
KAMAT Diesel Units Technical Data Sheet (Units-EN.pdf)
Official engineering publication providing certified duty points, dimensional footprints, nozzle flow curves, and mechanical tolerances.
Contents Included in this Datasheet:
- Pressure & volumetric flow rate curves
- Chassis footprints & dimensional schematics
- Plunger diameters & gearbox gear ratios
- Connection threads & safety certifications
Engineering Datasheets & Documentation
KAMAT Diesel Units Technical Data Sheet
PDF Document (302 KB)
KAMJET High-Pressure Units Catalog
PDF Document (10.0 MB)
KAMAT High-Pressure Plunger Pumps Portfolio
PDF Document (14.2 MB)
KAMAT Plunger Pumps Performance List
PDF Document (710 KB)
Frequently Asked Questions (FAQ)
Detailed answers to technical, operational, and maintenance inquiries regarding JETEQS K450 Ultra High-Pressure Jetting System systems and high-pressure pumping technology.
01 What is a diesel high-pressure jetting unit from JETEQS / KAMAT?
A diesel high-pressure unit is a turnkey industrial system combining a heavy-duty triplex plunger pump with an industrial diesel engine. These units are housed in sound-insulated enclosures or ISO containers and deliver volumetric flow rates up to 1,310 L/min at continuous operating pressures up to 3,500 bar (50,763 psi). Engineered for both mobile trailer and stationary skid deployment, they deliver rugged durability and fuel-efficient performance in extreme ambient environments.
02 What applications are covered by these diesel high-pressure units?
JETEQS diesel high-pressure units are utilized across demanding industrial sectors:
03 What are the core technical features of the modular high-pressure units?
Depending on the selected configuration within the modular system, units feature:
04 How is environmental compatibility and fuel economy ensured?
The units utilize industrial diesel engines compliant with the most stringent EU Stage V and EPA Tier 4 Final regulations. Intelligent closed-loop engine and pump management dynamically adjusts output to actual hydraulic demand, cutting fuel consumption by up to 30 percent compared to conventional fixed-displacement packages. Gentle pressure ramp-up reduces component mechanical fatigue, while advanced sound-attenuated housing keeps sound pressure levels well below permissible workplace thresholds.
05 What advantages do these units offer over conventional high-pressure equipment?
Key engineering advantages include:
06 How is maintenance and field service supported in the UAE and Middle East?
JETEQS maintains a centralized engineering workshop and spare parts depot in Musaffah, Abu Dhabi. Critical high-pressure seals, ceramic plungers, valve cartridges, and engine consumable kits are stocked locally for immediate dispatch. Certified service technicians provide on-site commissioning, routine preventative maintenance, hydrojetting operator safety training, and complete pump overhauls across the UAE and GCC region.
Request an Engineering Proposal
Our technical engineering specialists in Abu Dhabi provide full equipment sizing, duty point calculations, nozzle configurations, and delivery schedules.